tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly vs Timing belt pulley HTD-5M 52 teeth for belt width 25mm for taper-bush 1210
tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly and Timing belt pulley HTD-5M 52 teeth for belt width 25mm for taper-bush 1210 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly is €22.79 cheaper ($28.89).
| Criterion |  tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly |  Timing belt pulley HTD-5M 52 teeth for belt width 25mm for taper-bush 1210 |
|---|---|---|
| Price | $28.89cheapest | $55.18 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 74 g | 730 g |
| Bearing | 1 x 6200-2Z | — |
| Belt width | — | 25 mm |
| Bore max. | — | 32 mm |
| Bore min. | — | 10 mm |
| Clamp bushing type | — | 1 210 |
| Designation | TS 40-14 | — |
| Material | Aluminum | Steel |
| No of teeth | — | 52 |
| Outer diameter of flanges | — | 87 mm |
| Outer diameter pulley | — | 81.62 mm |
| Part no of suitable bushing | 14 081 009 | — |
| Pitch circle diameter | — | 82.76 mm |
| Profile | — | HTD 5M (Taper) |
| Surface | Blank | Phosphated |
| Total length | — | 25.5 mm |
| Version | — | 16 F |
| Weight of bushing | 10.5 g | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.