Welding hub for taper bush 1210 outside diameter 73mm material steel vs locking assembly TMK type B bore 7mm steel zinc/nickel plated
Welding hub for taper bush 1210 outside diameter 73mm material steel and locking assembly TMK type B bore 7mm steel zinc/nickel plated are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Welding hub for taper bush 1210 outside diameter 73mm material steel is €13.02 cheaper ($17.06).
| Criterion |  Welding hub for taper bush 1210 outside diameter 73mm material steel |  locking assembly TMK type B bore 7mm steel zinc/nickel plated |
|---|---|---|
| Price | $17.06cheapest | $32.08 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 310 g | 23 g |
| Admissible axial force | — | 5.8 kN |
| Design shape | — | Cylindrical with central nut |
| Diameter of assembling surface | 60 mm | — |
| Flange width da | 9 mm | — |
| For clamp bushing | 1 210 | — |
| Hub surface pressure | — | 121 N/mm2 |
| Inner diameter | — | 7 mm |
| Length | — | 22 mm |
| Material | Steel (A572) | Steel |
| Max bore diameter | 32 mm | — |
| Min bore diameter | 10 mm | — |
| Outer diameter | 73 mm | 14 mm |
| Self centering | — | Yes |
| Shaft surface pressure | — | 205 N/mm2 |
| Surface | Blank | Zinc-plated / Nickel-plated |
| Tightening torque fastening screw | — | 17 Nm |
| Total length | 25 mm | — |
| Transmissible torque | — | 20 Nm |
| Type | — | TMK-B |
| Width of assembling surface | 10 mm | — |
| Width of outer cone incl assembling surface | 16 mm | — |
| Wrench size | — | 16 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.