Welding hub for taper bush 1615 outside diameter 83mm material steel vs Locking assembly BAR bore 6.35mm QPQ-coated
Welding hub for taper bush 1615 outside diameter 83mm material steel and Locking assembly BAR bore 6.35mm QPQ-coated are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Locking assembly BAR bore 6.35mm QPQ-coated is €3.63 cheaper ($29.58).
| Criterion |  Welding hub for taper bush 1615 outside diameter 83mm material steel |  Locking assembly BAR bore 6.35mm QPQ-coated |
|---|---|---|
| Price | $33.77 | $29.58cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 600 g | 12 g |
| Admissible axial force | — | 3 kN |
| Design shape | — | Cylindrical with several screws |
| Diameter of assembling surface | 70 mm | — |
| Flange width da | 16 mm | — |
| For clamp bushing | 1 615 | — |
| Hub surface pressure | — | 72 N/mm2 |
| Inner diameter | — | 6.35 mm |
| Length | — | 11 mm |
| Material | Steel (A572) | Steel |
| Max bore diameter | 42 mm | — |
| Min bore diameter | 12 mm | — |
| No of bolts pcs | — | 3 |
| Outer diameter | 83 mm | 16 mm |
| Self centering | — | Yes |
| Shaft surface pressure | — | 180 N/mm2 |
| Surface | Blank | QPQ-coated |
| Thread size | — | M 2.5 x 10 |
| Tightening torque fastening screws | — | 1.2 Nm |
| Total length | 38 mm | — |
| Transmissible torque | — | 10 Nm |
| Type | — | BAR-QPQ |
| Width of assembling surface | 11 mm | — |
| Width of outer cone incl assembling surface | 22 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.