Welding hub for taper bush 3525 outside diameter 184mm material steel vs locking assembly TMK type B bore 38mm steel zinc/nickel plated
Welding hub for taper bush 3525 outside diameter 184mm material steel and locking assembly TMK type B bore 38mm steel zinc/nickel plated are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, locking assembly TMK type B bore 38mm steel zinc/nickel plated is €75.27 cheaper ($93.19).
| Criterion |  Welding hub for taper bush 3525 outside diameter 184mm material steel |  locking assembly TMK type B bore 38mm steel zinc/nickel plated |
|---|---|---|
| Price | $180.02 | $93.19cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 7.3 kg | 851 g |
| Admissible axial force | — | 60.2 kN |
| Design shape | — | Cylindrical with central nut |
| Diameter of assembling surface | 155 mm | — |
| Flange width da | 25 mm | — |
| For clamp bushing | 3 525 | — |
| Hub surface pressure | — | 116 N/mm2 |
| Inner diameter | — | 38 mm |
| Length | — | 58 mm |
| Material | Steel (A572) | Steel |
| Max bore diameter | 90 mm | — |
| Min bore diameter | 35 mm | — |
| Outer diameter | 184 mm | 58 mm |
| Self centering | — | Yes |
| Shaft surface pressure | — | 155 N/mm2 |
| Surface | Blank | Zinc-plated / Nickel-plated |
| Tightening torque fastening screw | — | 700 Nm |
| Total length | 65 mm | — |
| Transmissible torque | — | 1 140 Nm |
| Type | — | TMK-B |
| Width of assembling surface | 25 mm | — |
| Width of outer cone incl assembling surface | 40 mm | — |
| Wrench size | — | 65 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.