Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron vs Locking assembly SIG stainless steel 1.4301 bore 24mm
Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron and Locking assembly SIG stainless steel 1.4301 bore 24mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron is €33.75 cheaper ($44.53).
| Criterion |  Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron |  Locking assembly SIG stainless steel 1.4301 bore 24mm |
|---|---|---|
| Price | $44.53cheapest | $83.48 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Torque | — | 418.077 kg·cm |
| Torque max. | — | 458.865 kg·cm |
| Weight | 1.55 kg | 95 g |
| A | — | 27 mm |
| Angular distance per each hole | 60° ° | — |
| D | — | 24 mm |
| Diameter of mouning area | 90 mm | — |
| Flange width da | 6.5 mm | — |
| For clamp bushing | 1 210 | — |
| Hole circle diameter of mounting holes | 135 mm | — |
| Hole diameter | 7.5 mm | — |
| Hub diameter | 75 mm | — |
| Hub width | 9.25 mm | — |
| L | — | 35 mm |
| L1 | — | 29 mm |
| Material | Grey cast iron (A48) | — |
| Outer diameter | 180 mm | — |
| Quantity of holes | 6 mm | — |
| Surface | Blank | — |
| Sw | — | 34 mm |
| Thread | — | M28x1 |
| Total length | 25 mm | — |
| Width of assembling surface | 2.5 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.