Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron vs locking assembly TOK type A bore 19mm steel
Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron and locking assembly TOK type A bore 19mm steel are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, locking assembly TOK type A bore 19mm steel is €14.14 cheaper ($28.19).
| Criterion |  Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron |  locking assembly TOK type A bore 19mm steel |
|---|---|---|
| Price | $44.53 | $28.19cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 1.55 kg | 189 g |
| Admissible axial force | — | 24.8 kN |
| Angular distance per each hole | 60° ° | — |
| Design shape | — | Cylindrical with central nut |
| Diameter of mouning area | 90 mm | — |
| Flange width da | 6.5 mm | — |
| For clamp bushing | 1 210 | — |
| Hole circle diameter of mounting holes | 135 mm | — |
| Hole diameter | 7.5 mm | — |
| Hub diameter | 75 mm | — |
| Hub surface pressure | — | 125 N/mm2 |
| Hub width | 9.25 mm | — |
| Inner diameter | — | 19 mm |
| Length | — | 36 mm |
| Material | Grey cast iron (A48) | Steel |
| Outer diameter | 180 mm | 35 mm |
| Quantity of holes | 6 mm | — |
| Self centering | — | Yes |
| Shaft surface pressure | — | 213 N/mm2 |
| Surface | Blank | Blank |
| Tightening torque fastening screw | — | 161 Nm |
| Total length | 25 mm | — |
| Transmissible torque | — | 235 Nm |
| Type | — | TOK-A |
| Width of assembling surface | 2.5 mm | — |
| Wrench size | — | 36 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.