Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron vs Locking assembly COM-D bore 45mm size 45-75
Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron and Locking assembly COM-D bore 45mm size 45-75 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Locking assembly COM-D bore 45mm size 45-75 is €1.06 cheaper ($43.31).
| Criterion |  Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron |  Locking assembly COM-D bore 45mm size 45-75 |
|---|---|---|
| Price | $44.53 | $43.31cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 1.55 kg | 920 g |
| Admissible axial force | — | 100 kN |
| Angular distance per each hole | 60° ° | — |
| Bolts 12 9 no x size | — | 6 x M8 x 30 |
| Design shape | — | Cylindrical with several screws |
| Diameter of mouning area | 90 mm | — |
| Flange width da | 6.5 mm | — |
| For clamp bushing | 1 210 | — |
| Hole circle diameter of mounting holes | 135 mm | — |
| Hole diameter | 7.5 mm | — |
| Hub diameter | 75 mm | — |
| Hub surface pressure | — | 122 N/mm2 |
| Hub width | 9.25 mm | — |
| Inner diameter | — | 45 mm |
| Length | — | 47 mm |
| Material | Grey cast iron (A48) | Steel |
| Outer diameter | 180 mm | 75 mm |
| Quantity of holes | 6 mm | — |
| Self centering | — | Yes |
| Shaft surface pressure | — | 204 N/mm2 |
| Surface | Blank | Blank |
| Tightening torque fastening screws | — | 41 Nm |
| Total length | 25 mm | — |
| Transmissible torque | — | 2 330 Nm |
| Type | — | COM-D |
| Width of assembling surface | 2.5 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.