Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron vs Shrink disc ST inner diameter 62mm
Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron and Shrink disc ST inner diameter 62mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron is €31.60 cheaper ($44.53).
| Criterion |  Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron |  Shrink disc ST inner diameter 62mm |
|---|---|---|
| Price | $44.53cheapest | $81.03 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 1.55 kg | 1.41 kg |
| Angular distance per each hole | 60° ° | — |
| Bolts no x size | — | 10 x M6 x 25 |
| Design shape | — | Shrunk disks / Shaft couplings |
| Diameter of mouning area | 90 mm | — |
| Flange width da | 6.5 mm | — |
| For clamp bushing | 1 210 | — |
| Hole circle diameter of mounting holes | 135 mm | — |
| Hole diameter | 7.5 mm | — |
| Hub diameter | 75 mm | — |
| Hub width | 9.25 mm | — |
| Inner diameter | — | 62 mm |
| Length | — | 30.5 mm |
| Material | Grey cast iron (A48) | Steel (4140) |
| Outer diameter | 180 mm | 110 mm |
| Quantity of holes | 6 mm | — |
| Self centering | — | No |
| Shaft diameter | — | 48 – 52 mm |
| Shaft surface pressure | — | 213 – 222 N/mm2 |
| Surface | Blank | Blank |
| Tightening torque fastening screws | — | 12 Nm |
| Total length | 25 mm | — |
| Transmissible torque | — | 2700 – 3200 Nm |
| Type | — | ST |
| Width of assembling surface | 2.5 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.