Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron vs Taper bush 2517 bore 42mm
Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron and Taper bush 2517 bore 42mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Taper bush 2517 bore 42mm is €13.80 cheaper ($28.60).
| Criterion |  Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron |  Taper bush 2517 bore 42mm |
|---|---|---|
| Price | $44.53 | $28.60cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 1.55 kg | 1.27 kg |
| Angular distance per each hole | 60° ° | — |
| Bore | — | 42 mm |
| Clamp bushing type | — | 2 517 |
| Depth of keyway | — | 3.3 mm |
| Diameter of mouning area | 90 mm | — |
| Flange width da | 6.5 mm | — |
| For clamp bushing | 1 210 | — |
| Hole circle diameter of mounting holes | 135 mm | — |
| Hole diameter | 7.5 mm | — |
| Hub diameter | 75 mm | — |
| Hub width | 9.25 mm | — |
| Keyway width | — | 12 mm |
| Length | — | 44.5 mm |
| Material | Grey cast iron (A48) | Grey cast iron (A48) |
| Outer diameter | 180 mm | 85.5 mm |
| Quantity of holes | 6 mm | — |
| Surface | Blank | Blank |
| Total length | 25 mm | — |
| Width of assembling surface | 2.5 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.