adaptor for taper bush 1008 outside diameter 45mm material cast iron vs Locking assembly SSGK bore 19mm size 19x30x18mm
adaptor for taper bush 1008 outside diameter 45mm material cast iron and Locking assembly SSGK bore 19mm size 19x30x18mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, adaptor for taper bush 1008 outside diameter 45mm material cast iron is €4.90 cheaper ($13.92).
| Criterion |  adaptor for taper bush 1008 outside diameter 45mm material cast iron |  Locking assembly SSGK bore 19mm size 19x30x18mm |
|---|---|---|
| Price | $13.92cheapest | $19.58 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Dimensions | — | 19x30x18mm |
| Weight | 100 g | 80 g |
| Admissible axial force | — | 7 kN |
| Depth of keyway adaptor | 2.5 mm | — |
| Depth of keyway hub | 2.8 mm | — |
| Design shape | — | Cylindrical with central nut |
| For clamp bushing | 1 008 | — |
| Hub surface pressure | — | 115 N/mm2 |
| Inner diameter | — | 19 mm |
| Key cross section | 5 x 5 mm | — |
| Length | — | 18 mm |
| Material | Grey cast iron (A48) | Steel |
| Min hub diameter for cast iron | 75 mm | — |
| Min hub diameter for steel | 60 mm | — |
| Outer diameter | 45 mm | 30 mm |
| Self centering | — | No |
| Shaft surface pressure | — | 181 N/mm2 |
| Slotted nut 8 8 thread size | — | M 25×1.5 |
| Surface | Blank | Blank |
| Tightening torque fastening screws | — | 160 Nm |
| Total length | 22 mm | — |
| Transmissible torque | — | 64 Nm |
| Type | — | SSGK |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.