adaptor for taper bush 1008 outside diameter 45mm material cast iron vs Locking assembly COM-CB3 light series bore 18mm size 18x55x30mm
adaptor for taper bush 1008 outside diameter 45mm material cast iron and Locking assembly COM-CB3 light series bore 18mm size 18x55x30mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, adaptor for taper bush 1008 outside diameter 45mm material cast iron is €4.82 cheaper ($13.92).
| Criterion |  adaptor for taper bush 1008 outside diameter 45mm material cast iron |  Locking assembly COM-CB3 light series bore 18mm size 18x55x30mm |
|---|---|---|
| Price | $13.92cheapest | $19.49 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Dimensions | — | 18x55x30mm |
| Weight | 100 g | 470 g |
| Admissible axial force | — | 18 kN |
| Bolts 12 9 no x size | — | 3 x M8 |
| Depth of keyway adaptor | 2.5 mm | — |
| Depth of keyway hub | 2.8 mm | — |
| Design shape | — | With flange, mechanical |
| For clamp bushing | 1 008 | — |
| Hub surface pressure | — | 56 N/mm2 |
| Inner diameter | — | 18 mm |
| Key cross section | 5 x 5 mm | — |
| Length | — | 30 mm |
| Material | Grey cast iron (A48) | Steel |
| Min hub diameter for cast iron | 75 mm | — |
| Min hub diameter for steel | 60 mm | — |
| Outer diameter | 45 mm | 55 mm |
| Row | — | Light |
| Self centering | — | Yes |
| Shaft surface pressure | — | 163 N/mm2 |
| Surface | Blank | Blank |
| Tightening torque fastening screws | — | 25 Nm |
| Total length | 22 mm | — |
| Transmissible torque | — | 150 Nm |
| Type | — | COM-CB3 |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.