adaptor for taper bush 1615 outside diameter 70mm material cast iron vs Locking assembly COM-R bore 55mm size 55x62x10mm (2 loose rings)
adaptor for taper bush 1615 outside diameter 70mm material cast iron and Locking assembly COM-R bore 55mm size 55x62x10mm (2 loose rings) are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Locking assembly COM-R bore 55mm size 55x62x10mm (2 loose rings) is €9.96 cheaper ($14.24).
| Criterion |  adaptor for taper bush 1615 outside diameter 70mm material cast iron |  Locking assembly COM-R bore 55mm size 55x62x10mm (2 loose rings) |
|---|---|---|
| Price | $25.73 | $14.24cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Dimensions | — | 55x62x10mm |
| Weight | 380 g | 49 g |
| Admissible axial force | — | 25 kN |
| Depth of keyway adaptor | 4 mm | — |
| Depth of keyway hub | 4.3 mm | — |
| Design shape | — | Loose rings |
| For clamp bushing | 1 615 | — |
| Hub surface pressure | — | 130 N/mm2 |
| Inner diameter | — | 55 mm |
| Key cross section | 10 x 8 mm | — |
| Length | — | 8.6 mm |
| Material | Grey cast iron (A48) | Steel |
| Min hub diameter for cast iron | 115 mm | — |
| Min hub diameter for steel | 95 mm | — |
| Outer diameter | 70 mm | 62 mm |
| Self centering | — | No |
| Shaft surface pressure | — | 146 N/mm2 |
| Surface | Blank | Blank |
| Total length | 38 mm | — |
| Transmissible torque | — | 700 Nm |
| Type | — | COM-R |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.