Flange for timing belt pulley thickness 1mm Ø 57 x 53 x 46mm steel zinc plated vs Timing belt pulley L material steel 10 teeth for belt width 050=12.7mm
Flange for timing belt pulley thickness 1mm Ø 57 x 53 x 46mm steel zinc plated and Timing belt pulley L material steel 10 teeth for belt width 050=12.7mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Flange for timing belt pulley thickness 1mm Ø 57 x 53 x 46mm steel zinc plated is €3.71 cheaper ($4.34).
| Criterion |  Flange for timing belt pulley thickness 1mm Ø 57 x 53 x 46mm steel zinc plated |  Timing belt pulley L material steel 10 teeth for belt width 050=12.7mm |
|---|---|---|
| Price | $4.34cheapest | $8.62 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Dimensions | 57x53x46mm | — |
| Weight | 7 g | 110 g |
| Belt width | — | 12.7 mm |
| Inner diameter | 46 mm | — |
| Kink point diameter | 53 mm | — |
| Material | Steel | Steel |
| No of teeth | — | 10 |
| Outer diameter | 57 mm | — |
| Outer diameter of flanges | — | 36 mm |
| Outer diameter pulley | — | 29.56 mm |
| Pilot hole | — | 8 mm |
| Profile | — | L |
| Surface | Zinc-plated | Phosphated |
| Thickness | 1 mm | — |
| Version | — | 1 F |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.