Flange for timing belt pulley thickness 1mm Ø 63 x 57 x 48mm steel zinc plated vs Timing belt pulley T5 material aluminium 11 teeth for belt width 16 mm 27 T5/11-2
Flange for timing belt pulley thickness 1mm Ø 63 x 57 x 48mm steel zinc plated and Timing belt pulley T5 material aluminium 11 teeth for belt width 16 mm 27 T5/11-2 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Flange for timing belt pulley thickness 1mm Ø 63 x 57 x 48mm steel zinc plated is €3.98 cheaper ($4.54).
| Criterion |  Flange for timing belt pulley thickness 1mm Ø 63 x 57 x 48mm steel zinc plated |  Timing belt pulley T5 material aluminium 11 teeth for belt width 16 mm 27 T5/11-2 |
|---|---|---|
| Price | $4.54Best value | $9.00Least favorable value |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Dimensions | 63x57x48mm | — |
| Weight | 10 gBest value | 19 gLeast favorable value |
| Belt width | — | 16 mm |
| Hub diameter | — | 10 mm |
| Inner diameter | 48 mm | — |
| Kink point diameter | 57 mm | — |
| Material | Steel | Aluminum |
| No of teeth | — | 11 |
| Outer diameter | 63 mm | — |
| Outer diameter of flanges | — | 23 mm |
| Outer diameter of pulley | — | 16.67 mm |
| Pilot hole | — | Without bore mm |
| Pitch circle diameter | — | 17.51 mm |
| Profile | — | T5 |
| Surface | Zinc-plated | Blank |
| Thickness | 1 mm | — |
| Tooth width | — | 21 mm |
| Total length | — | 27 mm |
| Type | — | 27 T5/11-2 |
| Version | — | 1 F |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.