Timing belt pulley T10 material aluminium 96 teeth for belt width 25 mm 40 T10/96-0 vs Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 85mm for taper bush 3525
Timing belt pulley T10 material aluminium 96 teeth for belt width 25 mm 40 T10/96-0 and Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 85mm for taper bush 3525 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley T10 material aluminium 96 teeth for belt width 25 mm 40 T10/96-0 is €264.82 cheaper ($317.31).
| Criterion |  Timing belt pulley T10 material aluminium 96 teeth for belt width 25 mm 40 T10/96-0 |  Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 85mm for taper bush 3525 |
|---|---|---|
| Price | $317.31cheapest | $622.78 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 6.58 kg | 28 kg |
| Belt width | 25 mm | 85 mm |
| Bore max. | — | 90 mm |
| Bore min. | — | 35 mm |
| Clamp bushing type | — | 3 525 |
| Hub diameter | 180 mm | — |
| Material | Aluminum | Grey cast iron (A48) |
| No of teeth | 96 | 90 |
| Outer diameter of pulley | 303.72 mm | — |
| Outer diameter pulley | — | 398.28 mm |
| Pilot hole | 18 mm | — |
| Pitch circle diameter | 305.58 mm | 401.07 mm |
| Profile | T10 | HTD 14M (Taper) |
| Surface | Blank | Phosphated |
| Tooth width | 30 mm | — |
| Total length | 40 mm | 65 mm |
| Type | 40 T10/96-0 | — |
| Version | 2 | 20 |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.