timing bar AT10 40 teeth length 160mm material 1.4305 vs Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 55mm for taper bush 3020
timing bar AT10 40 teeth length 160mm material 1.4305 and Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 55mm for taper bush 3020 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 55mm for taper bush 3020 is €362.74 cheaper ($463.08).
| Criterion |  timing bar AT10 40 teeth length 160mm material 1.4305 |  Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 55mm for taper bush 3020 |
|---|---|---|
| Price | $881.75 | $463.08cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | Backorder | In stock |
| Rating | — | — |
| Weight | 14.95 kg | 20 kg |
| Belt width | — | 55 mm |
| Bore max. | — | 75 mm |
| Bore min. | — | 20 mm |
| Clamp bushing type | — | 3 020 |
| Material | Stainless steel (303) | Grey cast iron (A48) |
| No of teeth | 40 | 90 |
| Optional flange | 16 019 226 | — |
| Outer diameter | 125.5 mm | — |
| Outer diameter pulley | — | 398.28 mm |
| Pitch circle diameter | — | 401.07 mm |
| Profile | AT10 | HTD 14M (Taper) |
| Surface | Blank | Phosphated |
| Toothed length | 160 mm | — |
| Total length | 160 mm | 51 mm |
| Version | — | 20 |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.