Timing belt pulley HTD 14M material steel 56 teeth for belt width 85mm for taper bush 3525 vs timing belt HTD-14M, width 85mm, Lw=4578mm, teeth: 327
Timing belt pulley HTD 14M material steel 56 teeth for belt width 85mm for taper bush 3525 and timing belt HTD-14M, width 85mm, Lw=4578mm, teeth: 327 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley HTD 14M material steel 56 teeth for belt width 85mm for taper bush 3525 is €316.75 cheaper ($469.94).
| Criterion |  Timing belt pulley HTD 14M material steel 56 teeth for belt width 85mm for taper bush 3525 |  timing belt HTD-14M, width 85mm, Lw=4578mm, teeth: 327 |
|---|---|---|
| Price | $469.94cheapest | $835.31 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 19 kg | — |
| Belt width | 85 mm | 85 mm |
| Bore max. | 90 mm | — |
| Bore min. | 35 mm | — |
| Clamp bushing type | 3 525 | — |
| Effective length | — | 4 578 mm |
| Material | Steel | Neoprene |
| No of teeth | 56 | 327 |
| Outer diameter of flanges | 256 mm | — |
| Outer diameter pulley | 246.76 mm | — |
| Pitch circle diameter | 249.55 mm | — |
| Profile | HTD 14M (Taper) | HTD 14M |
| Surface | Phosphated | Blank |
| Total length | 65 mm | — |
| Version | 18 F | — |
| Weight | — | 0.9 kg/m |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.