Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 18 teeth tooth width 12mm vs Spur gear made of polyacetal resin die-cast with hub module 2.5 27 teeth tooth width 17mm outside diameter 72,5mm
Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 18 teeth tooth width 12mm and Spur gear made of polyacetal resin die-cast with hub module 2.5 27 teeth tooth width 17mm outside diameter 72,5mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Spur gear made of polyacetal resin die-cast with hub module 2.5 27 teeth tooth width 17mm outside diameter 72,5mm is €13.40 cheaper ($16.13).
| Criterion |  Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 18 teeth tooth width 12mm |  Spur gear made of polyacetal resin die-cast with hub module 2.5 27 teeth tooth width 17mm outside diameter 72,5mm |
|---|---|---|
| Price | $31.60 | $16.13cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 70 g | 51.6 g |
| Admissible md | 1.4 Nm | — |
| Bore bh9 mm | — | 12 mm |
| Bore diameter | 8 mm | — |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 20 mm | 24 mm |
| Hub length | 13 mm | — |
| Material | Steel (1045) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | — | 777 Ncm |
| Module | 1.59 (5mm) | 2.5 |
| No of teeth | 18 | 27 |
| Outer diameter | 31.8 mm | 72.5 mm |
| Pitch circle diameter | 28.6 mm | 67.5 mm |
| Surface | Blank | Blank |
| Tooth quality | 8 | — |
| Tooth width | 12 mm | 17 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.