Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 18 teeth tooth width 12mm vs Gear rack made of polyketone die-cast module 3 tooth width 19.4mm height 15mm length 250mm
Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 18 teeth tooth width 12mm and Gear rack made of polyketone die-cast module 3 tooth width 19.4mm height 15mm length 250mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Gear rack made of polyketone die-cast module 3 tooth width 19.4mm height 15mm length 250mm is €5.11 cheaper ($25.70).
| Criterion |  Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 18 teeth tooth width 12mm |  Gear rack made of polyketone die-cast module 3 tooth width 19.4mm height 15mm length 250mm |
|---|---|---|
| Price | $31.60 | $25.70cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 70 g | 66.6 g |
| Admissible md | 1.4 Nm | — |
| Bore diameter | 8 mm | — |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 20 mm | — |
| Hub length | 13 mm | — |
| Material | Steel (1045) | Plastic die-cast (Polyketone, up to 140°C) |
| Module | 1.59 (5mm) | 3 |
| No of teeth | 18 | — |
| Nominal length | — | 250 mm |
| Outer diameter | 31.8 mm | — |
| Pitch circle diameter | 28.6 mm | — |
| Surface | Blank | Blank |
| Tooth quality | 8 | — |
| Tooth width | 12 mm | 19.4 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.