Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm vs Spur gear made of polyketone die-cast with hub module 2 110 teeth tooth width 19mm outside diameter 224mm
Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm and Spur gear made of polyketone die-cast with hub module 2 110 teeth tooth width 19mm outside diameter 224mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm is €20.46 cheaper ($70.62).
| Criterion |  Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm |  Spur gear made of polyketone die-cast with hub module 2 110 teeth tooth width 19mm outside diameter 224mm |
|---|---|---|
| Price | $70.62cheapest | $94.24 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 560 g | 521 g |
| Admissible md | 16.7 Nm | — |
| Bore bh9 mm | — | 20 mm |
| Bore diameter | 12 mm | — |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 50 mm | 40 mm |
| Hub length | 13 mm | — |
| Material | Steel (1045) | Plastic die-cast (Polyketone, up to 140°C) |
| Max torque | — | 4 780 Ncm |
| Module | 1.59 (5mm) | 2 |
| No of teeth | 50 | 110 |
| Outer diameter | 82.7 mm | 224 mm |
| Pitch circle diameter | 79.6 mm | 220 mm |
| Surface | Blank | Blank |
| Tooth quality | 8 | — |
| Tooth width | 12 mm | 19 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.