Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm vs Internal gear made of 1.4305 (AISI303) module 1,0 120 teeth teeth width 10mm
Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm and Internal gear made of 1.4305 (AISI303) module 1,0 120 teeth teeth width 10mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm is €77.63 cheaper ($143.07).
| Criterion |  Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm |  Internal gear made of 1.4305 (AISI303) module 1,0 120 teeth teeth width 10mm |
|---|---|---|
| Price | $143.07cheapest | $232.62 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 560 g | 488 g |
| Admissible md | 7.7 Nm | — |
| Bore diameter | 12 mm | — |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 50 mm | — |
| Hub length | 13 mm | — |
| Material | Stainless steel (303) | Stainless steel (303) |
| Module | 1.59 (5mm) | 1 |
| No of teeth | 50 | 120 |
| Outer diameter | 82.7 mm | — |
| Outer diameter da mm | — | 150 mm |
| Pitch circle diameter | 79.6 mm | — |
| Surface | Blank | Blank |
| Tooth quality | 8 | — |
| Tooth width | 12 mm | 10 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.