Spur gear made of steel 11SMn30+C with hub module 0.5 13 teeth tooth width 4mm outside diameter 7mm vs Spur gear made of polyacetal resin die-cast with hub module 0.7 96 teeth tooth width 6mm outside diameter 68.6mm
Spur gear made of steel 11SMn30+C with hub module 0.5 13 teeth tooth width 4mm outside diameter 7mm and Spur gear made of polyacetal resin die-cast with hub module 0.7 96 teeth tooth width 6mm outside diameter 68.6mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Spur gear made of polyacetal resin die-cast with hub module 0.7 96 teeth tooth width 6mm outside diameter 68.6mm is €4.61 cheaper ($6.46).
| Criterion |  Spur gear made of steel 11SMn30+C with hub module 0.5 13 teeth tooth width 4mm outside diameter 7mm |  Spur gear made of polyacetal resin die-cast with hub module 0.7 96 teeth tooth width 6mm outside diameter 68.6mm |
|---|---|---|
| Price | $11.78 | $6.46cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 1 g | 23.6 g |
| Admissible md | 1.1 Ncm | — |
| Bore bh9 mm | — | 10 mm |
| Bore diameter | 2 mm | — |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 5 mm | 21 mm |
| Hub length | 4 mm | — |
| Material | Steel (12L13) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | — | 139.8 Ncm |
| Module | 0.5 | 0.7 |
| No of teeth | 13 | 96 |
| Outer diameter | 7.5 mm | 68.6 mm |
| Pitch circle diameter | 6.5 mm | 67.2 mm |
| Surface | Blank | Blank |
| Tooth quality | 8 | — |
| Tooth width | 4 mm | 6 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.