Spur gear made of steel 11SMn30+C with hub module 0.5 14 teeth tooth width 4mm outside diameter 8mm vs Gear rack made of polyketone die-cast module 1.25 tooth width 10mm height 11mm length 250mm
Spur gear made of steel 11SMn30+C with hub module 0.5 14 teeth tooth width 4mm outside diameter 8mm and Gear rack made of polyketone die-cast module 1.25 tooth width 10mm height 11mm length 250mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Gear rack made of polyketone die-cast module 1.25 tooth width 10mm height 11mm length 250mm is €1.04 cheaper ($10.00).
| Criterion |  Spur gear made of steel 11SMn30+C with hub module 0.5 14 teeth tooth width 4mm outside diameter 8mm |  Gear rack made of polyketone die-cast module 1.25 tooth width 10mm height 11mm length 250mm |
|---|---|---|
| Price | $11.19 | $10.00cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 2 g | 30.8 g |
| Admissible md | 1.2 Ncm | — |
| Bore diameter | 2 mm | — |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 5 mm | — |
| Hub length | 4 mm | — |
| Material | Steel (12L13) | Plastic die-cast (Polyketone, up to 140°C) |
| Module | 0.5 | 1.25 |
| No of teeth | 14 | — |
| Nominal length | — | 250 mm |
| Outer diameter | 8 mm | — |
| Pitch circle diameter | 7 mm | — |
| Surface | Blank | Blank |
| Tooth quality | 8 | — |
| Tooth width | 4 mm | 10 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.