Spur gear made of steel 11SMn30+C with hub module 0.7 12 teeth tooth width 5mm outside diameter 9.8mm vs Spur gear made of polyacetal resin die-cast with hub module 1.5 13 teeth tooth width 12mm outside diameter 22.5mm
Spur gear made of steel 11SMn30+C with hub module 0.7 12 teeth tooth width 5mm outside diameter 9.8mm and Spur gear made of polyacetal resin die-cast with hub module 1.5 13 teeth tooth width 12mm outside diameter 22.5mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Spur gear made of polyacetal resin die-cast with hub module 1.5 13 teeth tooth width 12mm outside diameter 22.5mm is €2.70 cheaper ($4.22).
| Criterion |  Spur gear made of steel 11SMn30+C with hub module 0.7 12 teeth tooth width 5mm outside diameter 9.8mm |  Spur gear made of polyacetal resin die-cast with hub module 1.5 13 teeth tooth width 12mm outside diameter 22.5mm |
|---|---|---|
| Price | $7.34 | $4.22cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 3 g | 6.14 g |
| Admissible md | 2.6 Ncm | — |
| Bore bh9 mm | — | 6 mm |
| Bore diameter | 3 mm | — |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 8 mm | 14 mm |
| Hub length | 6 mm | — |
| Material | Steel (12L13) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | — | 38 Ncm |
| Module | 0.7 | 1.5 |
| No of teeth | 12 | 13 |
| Outer diameter | 9.8 mm | 22.5 mm |
| Pitch circle diameter | 8.4 mm | 19.5 mm |
| Surface | Blank | Blank |
| Tooth quality | 8 | — |
| Tooth width | 5 mm | 12 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.