TB6612FNG Dual Motor Driver Carrier vs JST SH-Style Cable for Micro Metal Gearmotor Encoders, 6-Pin, Single-Ended Female, 30cm
TB6612FNG Dual Motor Driver Carrier and JST SH-Style Cable for Micro Metal Gearmotor Encoders, 6-Pin, Single-Ended Female, 30cm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, JST SH-Style Cable for Micro Metal Gearmotor Encoders, 6-Pin, Single-Ended Female, 30cm is €1.69 cheaper ($3.00).
| Criterion |  TB6612FNG Dual Motor Driver Carrier |  JST SH-Style Cable for Micro Metal Gearmotor Encoders, 6-Pin, Single-Ended Female, 30cm |
|---|---|---|
| Price | $4.95 | $3.00cheapest |
| Seller | Pololu | Pololu |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | — | 1 A |
| Frequency max. | 100 000 Hz | — |
| Voltage | — | 50 V |
| Voltage max. | 13.5 V | — |
| Voltage min. | 4.5 V | — |
| Weight | 1.5 g | 3 g |
| Connector | — | JST SH-type |
| Continuous output current per channel | 1 A | — |
| Continuous paralleled output current | 2 A | — |
| Gender | — | Female-unterminated |
| Length | — | 30 cm |
| Maximum logic voltage | 5.5 V | — |
| Minimum logic voltage | 2.7 V | — |
| Motor channels | 2 | — |
| Motor driver | TB6612FNG | — |
| Peak output current per channel | 3 A | — |
| Pins | — | 1×6 |
| Pitch | — | 1 mm |
| Reverse voltage protection | Yes | — |
| Size | 0.60" x 0.80" | — |
| Terminations length | — | single-ended, 30 cm |
| Wire gauge | — | 28 AWG |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.