Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase vs Glideforce GF01-122103-1-66 Micro Linear Actuator with Limit Switches: 12V, 8.1kgf, 6mm/s, 30mm Stroke
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase and Glideforce GF01-122103-1-66 Micro Linear Actuator with Limit Switches: 12V, 8.1kgf, 6mm/s, 30mm Stroke are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase is €27.58 cheaper ($43.12).
| Criterion |  Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase |  Glideforce GF01-122103-1-66 Micro Linear Actuator with Limit Switches: 12V, 8.1kgf, 6mm/s, 30mm Stroke |
|---|---|---|
| Price | $43.12cheapest | $74.95 |
| Seller | Pololu | Pololu |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | 1.2 A | — |
| Current max. | — | 0.25 A |
| Resistance | 3.3 Ω | — |
| Voltage | 4 V | 12 V |
| Dimensions | 42×48mm | — |
| Weight | 350 g | 37 g |
| Ip rating | — | 66 |
| Actual stroke length | — | 30 mm |
| Current 12v no load | — | 150 mA |
| Extended length | — | 117 mm |
| Feedback potentiometer included | — | No |
| Gear ratio | — | 210:1 |
| Holding torque | 44 oz·in | — |
| Inductance per phase | 2.8 mH | — |
| Lead length | 30 cm | — |
| Limit switches included | — | Yes |
| Linear speed 12v max load | — | 6 mm/s |
| Linear speed 12v no load | — | 8.6 mm/s |
| Max linear force 12v | — | 18 lb |
| Maximum duty cycle | — | 20 |
| Maximum operating temperature | — | 50 °C |
| Minimum operating temperature | — | -10 °C |
| Nema size | 17 | — |
| Number of leads | 6 | — |
| Retracted length | — | 87 mm |
| Shaft diameter | 5 mm | — |
| Shaft type | 5 mm "D" | — |
| Size | 42.3 mm square × 48 mm<br/>(NEMA 17) | — |
| Stall current 12v | — | 280 mA |
| Steps per revolution | 200 | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.