High-Power Simple Motor Controller G2 18v15 (Connectors Soldered) vs RoboClaw 2x45A Motor Controller (V6B/V6F, pin header I/O)
High-Power Simple Motor Controller G2 18v15 (Connectors Soldered) and RoboClaw 2x45A Motor Controller (V6B/V6F, pin header I/O) are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, High-Power Simple Motor Controller G2 18v15 (Connectors Soldered) is €33.59 cheaper ($141.18).
| Criterion |  High-Power Simple Motor Controller G2 18v15 (Connectors Soldered) |  RoboClaw 2x45A Motor Controller (V6B/V6F, pin header I/O) |
|---|---|---|
| Price | $141.18cheapest | $179.95 |
| Seller | Pololu | Pololu |
| Availability | In stock | In stock |
| Rating | — | — |
| Frequency max. | 22 500 Hz | — |
| Voltage max. | 30 V | 34 V |
| Voltage min. | 6.5 V | 6 V |
| Weight | 12.5 g | 60 g |
| Connectors soldered | Yes | — |
| Continuous output current per channel | 15 A | 45 A |
| Control interface | USB; non-inverted TTL serial; I²C;<br>RC servo pulses; analog voltage | USB; non-inverted TTL serial (2-way);<br/>RC servo pulses; analog voltage |
| Maximum logic voltage | 3.3 V | — |
| Motor channels | 1 | 2 |
| Other pcb markings | 0J11672, blank white box | — |
| Pcb dev codes | umc08a | — |
| Peak output current per channel | — | 60 A |
| Reverse voltage protection | Yes | — |
| Size | 2.1″ × 1.1″ × 0.5″ | 2.1″ × 2.9″ × 0.9″ |
| Version | G2 18v15 (30 V max, 15 A max continuous) | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.