Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 8.6V, 1 A/Phase vs Glideforce GF23-120504-1-65 High-Speed LD Linear Actuator: 12kgf, 4" Stroke (3.9" Usable), 3.3"/s, 12V
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 8.6V, 1 A/Phase and Glideforce GF23-120504-1-65 High-Speed LD Linear Actuator: 12kgf, 4" Stroke (3.9" Usable), 3.3"/s, 12V are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 8.6V, 1 A/Phase is €77.95 cheaper ($95.92).
| Criterion |  Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 8.6V, 1 A/Phase |  Glideforce GF23-120504-1-65 High-Speed LD Linear Actuator: 12kgf, 4" Stroke (3.9" Usable), 3.3"/s, 12V |
|---|---|---|
| Price | $95.92cheapest | $185.89 |
| Seller | Pololu | Pololu |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | 1 A | — |
| Current max. | — | 3.4 A |
| Resistance | 8.6 Ω | — |
| Voltage | 8.6 V | 12 V |
| Dimensions | 57×76mm | — |
| Weight | 1 kg | 950 g |
| Ip rating | — | IP65 |
| Actual stroke length | — | 3.94 in |
| Current 12v no load | — | 1.1 A |
| Extended length | — | 12.17 in |
| Feedback potentiometer included | — | No |
| Gear ratio | — | 5:1 |
| Holding torque | 190 oz·in | — |
| Inductance per phase | 14 mH | — |
| Lead length | 30 cm | — |
| Limit switches included | — | Yes |
| Linear speed 12v max load | — | 2.9 in/s |
| Linear speed 12v no load | — | 3.3 in/s |
| Max linear force 12v | — | 27 lb |
| Maximum duty cycle | — | 25 % |
| Maximum operating temperature | — | 65 °C |
| Minimum operating temperature | — | -25.0 °C |
| Nema size | 23 | — |
| Nominal stroke length | — | 4 in |
| Number of leads | 6 | — |
| Retracted length | — | 8.23 in |
| Shaft diameter | 6.35 mm | — |
| Shaft type | 1/4 inch "D" | — |
| Size | 56.4 mm square × 76 mm | — |
| Stall current 12v | — | 7 A |
| Steps per revolution | 200 | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.