Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×24.5mm, 3.5V, 1 A/Phase, 4000 CPR vs Glideforce LACT2-12V-20 Light-Duty Linear Actuator: 50kgf, 2" Stroke (1.97" Usable), 0.57"/s, 12V
Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×24.5mm, 3.5V, 1 A/Phase, 4000 CPR and Glideforce LACT2-12V-20 Light-Duty Linear Actuator: 50kgf, 2" Stroke (1.97" Usable), 0.57"/s, 12V are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Glideforce LACT2-12V-20 Light-Duty Linear Actuator: 50kgf, 2" Stroke (1.97" Usable), 0.57"/s, 12V is €110.86 cheaper ($160.73).
| Criterion |  Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×24.5mm, 3.5V, 1 A/Phase, 4000 CPR |  Glideforce LACT2-12V-20 Light-Duty Linear Actuator: 50kgf, 2" Stroke (1.97" Usable), 0.57"/s, 12V |
|---|---|---|
| Price | $288.69 | $160.73cheapest |
| Seller | Pololu | Pololu |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | 1 A | — |
| Current max. | — | 3.2 A |
| Resistance | 3.5 Ω | — |
| Voltage | 3.5 V | 12 V |
| Weight | 105 g | 860 g |
| Ip rating | — | IP65 |
| Actual stroke length | — | 1.97 in |
| Current 12v no load | — | 1.2 A |
| Encoder resolution | 4000 CPR | — |
| Encoders | Yes | — |
| Extended length | — | 8.19 in |
| Feedback potentiometer included | — | No |
| Gear ratio | — | 20:1 |
| Holding torque | 11.8 oz·in | — |
| Inductance per phase | 1.2 mH | — |
| Lead length | 30 cm | — |
| Limit switches included | — | Yes |
| Linear speed 12v max load | — | 0.48 in/s |
| Linear speed 12v no load | — | 0.57 in/s |
| Max linear force 12v | — | 110 lb |
| Maximum duty cycle | — | 25 % |
| Maximum operating temperature | — | 65 °C |
| Minimum operating temperature | — | -25.0 °C |
| Model | SS2421-50XE100 | — |
| Nema size | 17 | — |
| Nominal stroke length | — | 2 in |
| Number of leads | 4 | — |
| Retracted length | — | 6.22 in |
| Shaft diameter | 5 mm | — |
| Size | 42 mm square × 24.5 mm<br/>(NEMA 17) | — |
| Stall current 12v | — | 7 A |
| Steps per revolution | 200 | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.