Sanyo Miniature Stepper Motor: Bipolar, 200 Steps/Rev, 14×30mm, 6.3V, 0.3 A/Phase vs Glideforce LACT10P-12V-05 Light-Duty Linear Actuator with Feedback: 15kgf, 10" Stroke (9.8" Usable), 1.7"/s, 12V
Sanyo Miniature Stepper Motor: Bipolar, 200 Steps/Rev, 14×30mm, 6.3V, 0.3 A/Phase and Glideforce LACT10P-12V-05 Light-Duty Linear Actuator with Feedback: 15kgf, 10" Stroke (9.8" Usable), 1.7"/s, 12V are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Sanyo Miniature Stepper Motor: Bipolar, 200 Steps/Rev, 14×30mm, 6.3V, 0.3 A/Phase is €43.98 cheaper ($148.44).
| Criterion |  Sanyo Miniature Stepper Motor: Bipolar, 200 Steps/Rev, 14×30mm, 6.3V, 0.3 A/Phase |  Glideforce LACT10P-12V-05 Light-Duty Linear Actuator with Feedback: 15kgf, 10" Stroke (9.8" Usable), 1.7"/s, 12V |
|---|---|---|
| Price | $148.44cheapest | $199.18 |
| Seller | Pololu | Pololu |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | 0.3 A | — |
| Current max. | — | 3.2 A |
| Resistance | 21 Ω | — |
| Voltage | 6.3 V | 12 V |
| Dimensions | 14×30mm | — |
| Weight | 27 g | 1.39 kg |
| Ip rating | — | IP65 |
| Actual stroke length | — | 9.84 in |
| Current 12v no load | — | 1.2 A |
| Encoders | No | — |
| Extended length | — | 25.55 in |
| Feedback potentiometer included | — | Yes |
| Gear ratio | — | 5:1 |
| Holding torque | 0.92 oz·in | — |
| Inductance per phase | 4.2 mH | — |
| Lead length | 30 cm | — |
| Limit switches included | — | Yes |
| Linear speed 12v max load | — | 1.4 in/s |
| Linear speed 12v no load | — | 1.7 in/s |
| Max linear force 12v | — | 34 lb |
| Maximum duty cycle | — | 25 % |
| Maximum operating temperature | — | 65 °C |
| Minimum operating temperature | — | -25.0 °C |
| Model | SH2141-5541 or SH2141-5541P | — |
| Nominal stroke length | — | 10 in |
| Number of leads | 4 | — |
| Retracted length | — | 15.71 in |
| Shaft diameter | 4 mm | — |
| Shaft type | Single shaft | — |
| Size | 14 mm square × 30 mm | — |
| Stall current 12v | — | 7 A |
| Steps per revolution | 200 | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.