Worm shaft made of steel 11SMn30+C module 0.5 single-thread right hand vs Bevel gear made of steel module 1 20 teeth i=1:1 milled
Worm shaft made of steel 11SMn30+C module 0.5 single-thread right hand and Bevel gear made of steel module 1 20 teeth i=1:1 milled are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of steel module 1 20 teeth i=1:1 milled is €5.26 cheaper ($17.33).
| Criterion |  Worm shaft made of steel 11SMn30+C module 0.5 single-thread right hand |  Bevel gear made of steel module 1 20 teeth i=1:1 milled |
|---|---|---|
| Price | $23.39 | $17.33cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 9 g | 15 g |
| Bore | — | 5 mm |
| Material | Steel (12L13) | Steel (12L13) |
| Max torque | — | 0.138 Nm |
| Module | 0.5 single-thread RH | 1 |
| No of teeth | — | 20 |
| Optional counter wheel part no | — | 36 051 100 |
| Outer diameter | 8 mm | 21.4 mm |
| Ratio | — | 1:1 (20/20) |
| Surface | Blank | Blank |
| Tooth quality | — | 8 |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.