Bevel gear made of brass Ms58 module 0.5 24 teeth i=1:1 milled vs Bevel gear made of polyketone die-cast module 1.5 40 teeth i=4:1 bore 12mm
Bevel gear made of brass Ms58 module 0.5 24 teeth i=1:1 milled and Bevel gear made of polyketone die-cast module 1.5 40 teeth i=4:1 bore 12mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyketone die-cast module 1.5 40 teeth i=4:1 bore 12mm is €6.35 cheaper ($10.07).
| Criterion |  Bevel gear made of brass Ms58 module 0.5 24 teeth i=1:1 milled |  Bevel gear made of polyketone die-cast module 1.5 40 teeth i=4:1 bore 12mm |
|---|---|---|
| Price | $17.40 | $10.07cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 3 g | 28.7 g |
| Bore | 4 mm | — |
| Material | Brass (Ms58) | Plastic die-cast (Polyketone, up to 140°C) |
| Max torque | 3 Ncm | 71 Ncm |
| Module | 0.5 | 1.5 |
| No of teeth | 24 | 40 |
| Optional counter wheel part no | 35 021 500 | 35 578 801 |
| Outer diameter | 12.7 mm | 61.2 mm |
| Ratio | 1:1 (24/24) | 4:1 (10/40) |
| Surface | Blank | Blank |
| Tooth quality | 8 | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.