Bevel gear made of brass Ms58 module 0.5 15 teeth i=3:1 milled vs Bevel gear made of polyacetal resin die-cast module 1.5 45 teeth i=3:1 bore 12mm
Bevel gear made of brass Ms58 module 0.5 15 teeth i=3:1 milled and Bevel gear made of polyacetal resin die-cast module 1.5 45 teeth i=3:1 bore 12mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyacetal resin die-cast module 1.5 45 teeth i=3:1 bore 12mm is €7.60 cheaper ($9.95).
| Criterion |  Bevel gear made of brass Ms58 module 0.5 15 teeth i=3:1 milled |  Bevel gear made of polyacetal resin die-cast module 1.5 45 teeth i=3:1 bore 12mm |
|---|---|---|
| Price | $18.72 | $9.95cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 1 g | 50.5 g |
| Bore | 3 mm | — |
| Material | Brass (Ms58) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | 1.5 Ncm | 192 Ncm |
| Module | 0.5 | 1.5 |
| No of teeth | 15 | 45 |
| Optional counter wheel part no | 35 027 700 | 35 577 600 |
| Outer diameter | 8.8 mm | 68.8 mm |
| Ratio | 3:1 (45/15) | 3:1 (45/15) |
| Surface | Blank | Blank |
| Tooth quality | 8 | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.