Bevel gear made of brass Ms58 module 1 16 teeth i=1:1 milled vs Bevel gear made of polyacetal resin die-cast module 2 30 teeth i=3:1 bore 12mm
Bevel gear made of brass Ms58 module 1 16 teeth i=1:1 milled and Bevel gear made of polyacetal resin die-cast module 2 30 teeth i=3:1 bore 12mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyacetal resin die-cast module 2 30 teeth i=3:1 bore 12mm is €6.66 cheaper ($9.31).
| Criterion |  Bevel gear made of brass Ms58 module 1 16 teeth i=1:1 milled |  Bevel gear made of polyacetal resin die-cast module 2 30 teeth i=3:1 bore 12mm |
|---|---|---|
| Price | $16.99 | $9.31cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 9 g | 38 g |
| Bore | 5 mm | — |
| Material | Brass (Ms58) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | 6 Ncm | 90 Ncm |
| Module | 1 | 2 |
| No of teeth | 16 | 30 |
| Optional counter wheel part no | 35 050 700 | 35 607 400 |
| Outer diameter | 17.4 mm | 61.7 mm |
| Ratio | 1:1 (16/16) | 3:1 (30/10) |
| Surface | Blank | Blank |
| Tooth quality | 8 | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.