Bevel gear made of polyacetal resin die-cast module 0.5 16 teeth i=1:1 bore 3mm vs Bevel gear made of polyketone die-cast module 1 16 teeth i=1:1 bore 5mm
Bevel gear made of polyacetal resin die-cast module 0.5 16 teeth i=1:1 bore 3mm and Bevel gear made of polyketone die-cast module 1 16 teeth i=1:1 bore 5mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyacetal resin die-cast module 0.5 16 teeth i=1:1 bore 3mm is €0.40 cheaper ($0.69).
| Criterion |  Bevel gear made of polyacetal resin die-cast module 0.5 16 teeth i=1:1 bore 3mm |  Bevel gear made of polyketone die-cast module 1 16 teeth i=1:1 bore 5mm |
|---|---|---|
| Price | $0.69cheapest | $1.15 |
| Seller | MÄDLER | MÄDLER |
| Availability | Backorder | Backorder |
| Rating | — | — |
| Weight | 0.3 g | 1.8 g |
| Material | Plastic die-cast (Polyacetal, up to 80°C) | Plastic die-cast (Polyketone, up to 140°C) |
| Max torque | 0.9 Ncm | 8.7 Ncm |
| Module | 0.5 | 1 |
| No of teeth | 16 | 16 |
| Optional counter wheel part no | 35 520 700 | 35 550 701 |
| Outer diameter | 8.7 mm | 17.6 mm |
| Ratio | 1:1 (16/16) | 1:1 (16/16) |
| Surface | Blank | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.