Bevel gear made of polyketone die-cast module 1 16 teeth i=1:1 bore 5mm vs Bevel gear made of polyketone die-cast module 1 10 teeth i=4:1 bore 4mm
Bevel gear made of polyketone die-cast module 1 16 teeth i=1:1 bore 5mm and Bevel gear made of polyketone die-cast module 1 10 teeth i=4:1 bore 4mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyketone die-cast module 1 16 teeth i=1:1 bore 5mm is €0.42 cheaper ($1.15).
| Criterion |  Bevel gear made of polyketone die-cast module 1 16 teeth i=1:1 bore 5mm | Bevel gear made of polyketone die-cast module 1 10 teeth i=4:1 bore 4mm |
|---|---|---|
| Price | $1.15cheapest | $1.64 |
| Seller | MÄDLER | MÄDLER |
| Availability | Backorder | In stock |
| Rating | — | — |
| Weight | 1.8 g | 0.8 g |
| Material | Plastic die-cast (Polyketone, up to 140°C) | Plastic die-cast (Polyketone, up to 140°C) |
| Max torque | 8.7 Ncm | 4.7 Ncm |
| Module | 1 | 1 |
| No of teeth | 16 | 10 |
| Optional counter wheel part no | 35 550 701 | 35 558 901 |
| Outer diameter | 17.6 mm | 12 mm |
| Ratio | 1:1 (16/16) | 4:1 (10/40) |
| Surface | Blank | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.