Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=1:1 bore 6mm vs Bevel gear made of polyacetal resin die-cast module 2.5 10 teeth i=3:1 bore 8mm
Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=1:1 bore 6mm and Bevel gear made of polyacetal resin die-cast module 2.5 10 teeth i=3:1 bore 8mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=1:1 bore 6mm is €0.42 cheaper ($4.19).
| Criterion |  Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=1:1 bore 6mm | Bevel gear made of polyacetal resin die-cast module 2.5 10 teeth i=3:1 bore 8mm |
|---|---|---|
| Price | $4.19cheapest | $4.67 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 6 g | 10.2 g |
| Material | Plastic die-cast (Polyacetal, up to 80°C) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | 58 Ncm | 60 Ncm |
| Module | 1 | 2.5 |
| No of teeth | 30 | 10 |
| Optional counter wheel part no | 35 552 000 | 35 617 500 |
| Outer diameter | 31.4 mm | 29.7 mm |
| Ratio | 1:1 (30/30) | 3:1 (30/10) |
| Surface | Blank | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.