Bevel gear made of polyketone die-cast module 1 15 teeth i=2:1 bore 5mm vs Bevel gear made of polyacetal resin die-cast module 1 40 teeth i=4:1 bore 10mm
Bevel gear made of polyketone die-cast module 1 15 teeth i=2:1 bore 5mm and Bevel gear made of polyacetal resin die-cast module 1 40 teeth i=4:1 bore 10mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyketone die-cast module 1 15 teeth i=2:1 bore 5mm is €2.33 cheaper ($2.79).
| Criterion |  Bevel gear made of polyketone die-cast module 1 15 teeth i=2:1 bore 5mm |  Bevel gear made of polyacetal resin die-cast module 1 40 teeth i=4:1 bore 10mm |
|---|---|---|
| Price | $2.79cheapest | $5.48 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 2.2 g | 12.6 g |
| Material | Plastic die-cast (Polyketone, up to 140°C) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | 12.6 Ncm | 18 Ncm |
| Module | 1 | 1 |
| No of teeth | 15 | 40 |
| Optional counter wheel part no | 35 555 701 | 35 558 800 |
| Outer diameter | 16.8 mm | 40.8 mm |
| Ratio | 2:1 (15/30) | 4:1 (40/10) |
| Surface | Blank | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.