Bevel gear made of polyacetal resin die-cast module 1 15 teeth i=3:1 bore 5mm vs Bevel gear made of polyacetal resin die-cast module 1.5 10 teeth i=4:1 bore 5mm
Bevel gear made of polyacetal resin die-cast module 1 15 teeth i=3:1 bore 5mm and Bevel gear made of polyacetal resin die-cast module 1.5 10 teeth i=4:1 bore 5mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyacetal resin die-cast module 1 15 teeth i=3:1 bore 5mm is €0.28 cheaper ($1.71).
| Criterion |  Bevel gear made of polyacetal resin die-cast module 1 15 teeth i=3:1 bore 5mm | Bevel gear made of polyacetal resin die-cast module 1.5 10 teeth i=4:1 bore 5mm |
|---|---|---|
| Price | $1.71cheapest | $2.03 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 2.8 g | 3 g |
| Material | Plastic die-cast (Polyacetal, up to 80°C) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | 16 Ncm | 17 Ncm |
| Module | 1 | 1.5 |
| No of teeth | 15 | 10 |
| Optional counter wheel part no | 35 557 700 | 35 578 900 |
| Outer diameter | 16.6 mm | 18 mm |
| Ratio | 3:1 (45/15) | 4:1 (40/10) |
| Surface | Blank | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.