Bevel gear made of polyketone die-cast module 1 15 teeth i=3:1 bore 5mm vs Bevel gear made of polyacetal resin die-cast module 1 12 teeth i=5:1 bore 4mm
Bevel gear made of polyketone die-cast module 1 15 teeth i=3:1 bore 5mm and Bevel gear made of polyacetal resin die-cast module 1 12 teeth i=5:1 bore 4mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyacetal resin die-cast module 1 12 teeth i=5:1 bore 4mm is €0.63 cheaper ($1.40).
| Criterion |  Bevel gear made of polyketone die-cast module 1 15 teeth i=3:1 bore 5mm |  Bevel gear made of polyacetal resin die-cast module 1 12 teeth i=5:1 bore 4mm |
|---|---|---|
| Price | $2.12 | $1.40cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 2.8 g | 1.6 g |
| Material | Plastic die-cast (Polyketone, up to 140°C) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | 16.8 Ncm | 12 Ncm |
| Module | 1 | 1 |
| No of teeth | 15 | 12 |
| Optional counter wheel part no | 35 557 701 | 35 559 900 |
| Outer diameter | 16.6 mm | 13.7 mm |
| Ratio | 3:1 (15/45) | 5:1 (60/12) |
| Surface | Blank | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.