Clamp coupling (boc coupling) DIN 115 both sides bore 80mm with keyway material cast iron vs Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 200 max. torque 4020Nm nominal torque 1340Nm outer diameter 200mm Länge 162mm no bore
Clamp coupling (boc coupling) DIN 115 both sides bore 80mm with keyway material cast iron and Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 200 max. torque 4020Nm nominal torque 1340Nm outer diameter 200mm Länge 162mm no bore are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 200 max. torque 4020Nm nominal torque 1340Nm outer diameter 200mm Länge 162mm no bore is €69.64 cheaper ($581.21).
| Criterion |  Clamp coupling (boc coupling) DIN 115 both sides bore 80mm with keyway material cast iron |  Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 200 max. torque 4020Nm nominal torque 1340Nm outer diameter 200mm Länge 162mm no bore |
|---|---|---|
| Price | $661.67 | $581.21cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 27 kg | 23.3 kg |
| Bore diameter | 80 mm | — |
| Bore pilot hole | — | Without bore mm |
| Coupling type | Rigid two-piece stlye | Elastic. angular/transv./long flexible |
| Distance between the hubs | — | 2 – 6 mm |
| Electrically insulating | No | No |
| Flange width l3 | — | 47 mm |
| Flange width l4 | — | 32.5 mm |
| Hub diameter d1 | — | 140 mm |
| Hub diameter d2 | — | 122 mm |
| Hub length | — | 80 mm |
| Material | Grey cast iron (A48) | Grey cast iron/NBR |
| Max bore d1 | — | 85 mm |
| Max bore d2 | — | 75 mm |
| Max misalignment angle | 0 ° | 0.2 ° |
| Max misalignment axial | 0 mm | 2 mm |
| Max misalignment radial | 0 mm | 0.1 mm |
| Max speed | 1060 min-1 | 3400 min-1 |
| Max torque | 2 500 Nm | 4 020 Nm |
| Min distance for dismantling | — | 53 mm |
| Nominal torque | — | 1 340 Nm |
| Number of allen bolts din 931 | 8 | — |
| Outer diameter | 190 mm | 200 mm |
| Size | — | 200 |
| Stainless | No | No |
| Surface | Blank | Blank |
| Temperature max. | 150 °C | 80 °C |
| Temperature min. | -40 °C | -30 °C |
| Total length | 280 mm | 162 mm |
| Wear limit of backlash measured at the circumfer | — | 8.5 mm |
| With keyway | Yes | No |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.