Locking assembly COM-R bore 6mm size 6x9x4.5mm (2 loose rings) vs Bolt 1/2″ x 1 1/2″ for Taper bush 3525 and 3535
Locking assembly COM-R bore 6mm size 6x9x4.5mm (2 loose rings) and Bolt 1/2″ x 1 1/2″ for Taper bush 3525 and 3535 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bolt 1/2″ x 1 1/2″ for Taper bush 3525 and 3535 is €2.34 cheaper ($4.44).
| Criterion |  Locking assembly COM-R bore 6mm size 6x9x4.5mm (2 loose rings) |  Bolt 1/2″ x 1 1/2″ for Taper bush 3525 and 3535 |
|---|---|---|
| Price | $7.14 | $4.44cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 2 g | 49.7 g |
| Admissible axial force | 0.83 kN | — |
| Design shape | Loose rings | — |
| Hub surface pressure | 76 N/mm2 | — |
| Inner diameter | 6 mm | — |
| Length | 3.7 mm | 38.1 mm |
| Material | Steel | Steel |
| Outer diameter | 9 mm | 12.7 mm |
| Self centering | No | — |
| Shaft surface pressure | 116 N/mm2 | — |
| Size inch | — | BSW 1/2 x 1 1/2 |
| Suitable for clamping bushing type from | — | 3 525 |
| Suitable for clamping bushing type to | — | 3 535 |
| Surface | Blank | Blank |
| Thread pitch | — | 2.117 mm |
| Tightening torque | — | 112 Nm |
| Tolerance length | — | +/-0.7 mm |
| Tolerance outer diameter | — | -0.2 mm |
| Tolerance thread pitch | — | +/-0.2 mm |
| Tolerance wrench size | — | 0.27 mm |
| Transmissible torque | 2 Nm | — |
| Type | COM-R | — |
| Wrench size | — | 10 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.