Retaining ring DIN 471 32mm spr. steel vs Spring plunger d1=3mm type GN smooth with collar plunger and ball stainless steel
Retaining ring DIN 471 32mm spr. steel and Spring plunger d1=3mm type GN smooth with collar plunger and ball stainless steel are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Retaining ring DIN 471 32mm spr. steel is €0.95 cheaper ($1.10).
| Criterion |  Retaining ring DIN 471 32mm spr. steel |  Spring plunger d1=3mm type GN smooth with collar plunger and ball stainless steel |
|---|---|---|
| Price | $1.10cheapest | $2.19 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | — | 0.2 g |
| Ball diameter | — | 2.38 mm |
| Flange diameter | — | 3.5 mm |
| Flange length | — | 0.75 mm |
| Length | — | 4 mm |
| Material | Spring steel | Stainless steel |
| Nominal diameter | 32 mm | — |
| Outer diameter d1 0 08 0 | — | 3 mm |
| Overhang of ball | — | 0.7 mm |
| Spring load end | — | 3.5 N |
| Spring load inital | — | 1.8 N |
| Surface | Phosphated | Blank |
| Version | — | GN |
| Weight per 100 pcs | 0.354 kg | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.