Retaining ring DIN 471 75mm spr. steel vs Locknut GUK 8 M40 x 1,5 steel zinc-plated with polyamid insert
Retaining ring DIN 471 75mm spr. steel and Locknut GUK 8 M40 x 1,5 steel zinc-plated with polyamid insert are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Locknut GUK 8 M40 x 1,5 steel zinc-plated with polyamid insert is €0.18 cheaper ($5.96).
| Criterion |  Retaining ring DIN 471 75mm spr. steel |  Locknut GUK 8 M40 x 1,5 steel zinc-plated with polyamid insert |
|---|---|---|
| Price | $6.16 | $5.96cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | — | 79 g |
| Axial runout | — | 0.04 mm |
| Material | Spring steel | Steel |
| No of nuts | — | 4 |
| Nominal diameter | 75 mm | — |
| Outer diameter | — | 56 mm |
| Surface | Phosphated | Zinc-plated |
| Thread size x pitch | — | M 40×1.5 mm |
| Type | — | GUK 8 |
| Weight per 100 pcs | 2.46 kg | — |
| Width | — | 12.3 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.