Bolt 1/4″ x 1/2″ for Taper bush 1008 and 1108 vs Bolt 3/8″ x 5/8″ for Taper bush 1210 1610 and 1615
Bolt 1/4″ x 1/2″ for Taper bush 1008 and 1108 and Bolt 3/8″ x 5/8″ for Taper bush 1210 1610 and 1615 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bolt 1/4″ x 1/2″ for Taper bush 1008 and 1108 is €0.49 cheaper ($0.89).
| Criterion |  Bolt 1/4″ x 1/2″ for Taper bush 1008 and 1108 | Bolt 3/8″ x 5/8″ for Taper bush 1210 1610 and 1615 |
|---|---|---|
| Price | $0.89cheapest | $1.45 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 1.9 g | 5.2 g |
| Length | 12.7 mm | 15.88 mm |
| Material | Steel | Steel |
| Outer diameter | 6.35 mm | 9.53 mm |
| Size inch | BSW 1/4 x 1/2 | BSW 3/8 x 5/8 |
| Suitable for clamping bushing type from | 1 008 | 1 210 |
| Suitable for clamping bushing type to | 1 108 | 1 615 |
| Surface | Blank | Blank |
| Thread pitch | 1.27 mm | 1.587 mm |
| Tightening torque | 5.6 Nm | 20 Nm |
| Tolerance length | +/-0.35 mm | +/-0.35 mm |
| Tolerance outer diameter | -0.2 mm | -0.2 mm |
| Tolerance thread pitch | +/-0.2 mm | +/-0.2 mm |
| Tolerance wrench size | 0.15 mm | 0.2 mm |
| Wrench size | 3 mm | 5 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.