Bolt 3/8″ x 5/8″ for Taper bush 1210 1610 and 1615 vs Bolt 1/2″ x 1″ for Taper bush 2517 and 2525
Bolt 3/8″ x 5/8″ for Taper bush 1210 1610 and 1615 and Bolt 1/2″ x 1″ for Taper bush 2517 and 2525 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bolt 3/8″ x 5/8″ for Taper bush 1210 1610 and 1615 is €1.10 cheaper ($1.45).
| Criterion |  Bolt 3/8″ x 5/8″ for Taper bush 1210 1610 and 1615 | Bolt 1/2″ x 1″ for Taper bush 2517 and 2525 |
|---|---|---|
| Price | $1.45cheapest | $2.72 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 5.2 g | 16.4 g |
| Length | 15.88 mm | 12.7 mm |
| Material | Steel | Steel |
| Outer diameter | 9.53 mm | 12.7 mm |
| Size inch | BSW 3/8 x 5/8 | BSW 1/2 x 1 |
| Suitable for clamping bushing type from | 1 210 | 2 517 |
| Suitable for clamping bushing type to | 1 615 | 2 525 |
| Surface | Blank | Blank |
| Thread pitch | 1.587 mm | 2.117 mm |
| Tightening torque | 20 Nm | 50 Nm |
| Tolerance length | +/-0.35 mm | +/-0.35 mm |
| Tolerance outer diameter | -0.2 mm | -0.2 mm |
| Tolerance thread pitch | +/-0.2 mm | +/-0.2 mm |
| Tolerance wrench size | 0.2 mm | 0.2 mm |
| Wrench size | 5 mm | 6 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.