Slip shaft LW with ball joints bore 20H7 outer diameter 40mm steel vs Slip shaft with joints PWN with needle bearings bore 35H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 500mm max. length 600mm steel
Slip shaft LW with ball joints bore 20H7 outer diameter 40mm steel and Slip shaft with joints PWN with needle bearings bore 35H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 500mm max. length 600mm steel are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Slip shaft LW with ball joints bore 20H7 outer diameter 40mm steel is €385.72 cheaper ($472.07).
| Criterion |  Slip shaft LW with ball joints bore 20H7 outer diameter 40mm steel |  Slip shaft with joints PWN with needle bearings bore 35H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 500mm max. length 600mm steel |
|---|---|---|
| Price | $472.07cheapest | $917.27 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 2.75 kg | 10 kg |
| Bore | 20 mm | — |
| Bore diameter | — | 35 mm |
| Extended length | 460 mm | — |
| Material | Steel (12L13) | Steel |
| Max length | — | 600 mm |
| Max outer diameter | — | 70 mm |
| Max torque | 160 Nm | — |
| Max torque at 1 000 min 1 | — | 284 Nm |
| Max torque at 2 000 min 1 | — | 237.6 Nm |
| Max torque at 250 min 1 | — | 391 Nm |
| Max torque at 3 000 min 1 | — | 201.6 Nm |
| Max torque at 500 min 1 | — | 332 Nm |
| Outer diameter | 40 mm | — |
| Profile | 21×25 | — |
| Retracted length | 350 mm | — |
| Stroke | 110 mm | — |
| Surface | Blank | Blank |
| Telescoped length | — | 500 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.