Rod end GS DIN ISO 12240-4 series K internal thread M2 right == Initial lubrication required before use == vs Axial joint similar to DIN 71802 size 19 thread M14x1.5 RH with nut stainless steel 1.4301
Rod end GS DIN ISO 12240-4 series K internal thread M2 right == Initial lubrication required before use == and Axial joint similar to DIN 71802 size 19 thread M14x1.5 RH with nut stainless steel 1.4301 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rod end GS DIN ISO 12240-4 series K internal thread M2 right == Initial lubrication required before use == is €19.15 cheaper ($27.55).
| Criterion |  Rod end GS DIN ISO 12240-4 series K internal thread M2 right == Initial lubrication required before use == |  Axial joint similar to DIN 71802 size 19 thread M14x1.5 RH with nut stainless steel 1.4301 |
|---|---|---|
| Price | $27.55cheapest | $49.65 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 3 g | 220.9 g |
| Ball diameter | — | 19 mm |
| Bore | 2 mm | — |
| Center distance to mounting surface | 16 mm | — |
| Material | Steel / Brass | Stainless steel (304) |
| Outer diameter | 9 mm | — |
| Pivoting angle | — | 18 ° |
| Pull out force | — | 100 N |
| Surface | Zinc-plated | Blank |
| Thread pitch | 0.4 mm | — |
| Thread size | M 2 mm | M 14×1.5 mm |
| Thread type | right | — |
| Tilt angel | 16 ° | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.