Rod end GS DIN ISO 12240-4 series K internal thread M5 right == Initial lubrication required before use == vs Clevis joint DIN 71752 with split pin size 16 x 64 left handed steel zinc-plated
Rod end GS DIN ISO 12240-4 series K internal thread M5 right == Initial lubrication required before use == and Clevis joint DIN 71752 with split pin size 16 x 64 left handed steel zinc-plated are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rod end GS DIN ISO 12240-4 series K internal thread M5 right == Initial lubrication required before use == is €5.60 cheaper ($19.31).
| Criterion |  Rod end GS DIN ISO 12240-4 series K internal thread M5 right == Initial lubrication required before use == |  Clevis joint DIN 71752 with split pin size 16 x 64 left handed steel zinc-plated |
|---|---|---|
| Price | $19.31cheapest | $25.77 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 18 g | 430 g |
| Bolt diameter | — | 16 mm |
| Bore | 5 mm | — |
| Center distance to mounting surface | 27 mm | 96 mm |
| Inner width | — | 16 mm |
| Material | Steel / Brass | Steel |
| Outer diameter | 18 mm | — |
| Outer width | — | 32 mm |
| Pull out force | — | 22 608 N |
| Size | — | 16 x 64 |
| Surface | Zinc-plated | Zinc-plated |
| Thread pitch | 0.8 mm | 2 mm |
| Thread size | M 5 mm | M 16 mm |
| Thread type | right | left |
| Tilt angel | 13 ° | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.