Rod end GS DIN ISO 12240-4 series K internal thread M5 right == Initial lubrication required before use == vs Mating piece for clevis joint DIN 71752 size 12 x 24 internal thread M12 steel zinc plated
Rod end GS DIN ISO 12240-4 series K internal thread M5 right == Initial lubrication required before use == and Mating piece for clevis joint DIN 71752 size 12 x 24 internal thread M12 steel zinc plated are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Mating piece for clevis joint DIN 71752 size 12 x 24 internal thread M12 steel zinc plated is €4.95 cheaper ($13.60).
| Criterion |  Rod end GS DIN ISO 12240-4 series K internal thread M5 right == Initial lubrication required before use == |  Mating piece for clevis joint DIN 71752 size 12 x 24 internal thread M12 steel zinc plated |
|---|---|---|
| Price | $19.31 | $13.60cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 18 g | 168 g |
| Bore | 5 mm | — |
| Center distance to mounting surface | 27 mm | 48 mm |
| Hole diameter for bolts | — | 12 mm |
| Inner width | — | 12 mm |
| Material | Steel / Brass | Steel |
| Outer diameter | 18 mm | — |
| Outer width | — | 24 mm |
| Size | — | 12 x 24 |
| Surface | Zinc-plated | Zinc-plated |
| Thread pitch | 0.8 mm | 1.75 mm |
| Thread size | M 5 mm | M 12 mm |
| Thread type | right | — |
| Thread type gewindeausfuhrung | — | right |
| Tilt angel | 13 ° | — |
| Total length | — | 62 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.